|
Socket Head Kit
|
Department
|
Full Description
|
|
Part Number
|
Purchase
|
|
Motor Mounts
|
Block
System: Engine Mounting
|
This Kit supplies the Socket Head Bolts to Attach the
Motor Mounts to the Engine.
|
|
MODSHALLMMK107
|
|
|
Bell Housing Bolt Kit
|
Block System: Engine Mounting
|
Kit allows the transmission to be mated to the engine
|
|
MODSHALLBHK106
|
|
|
Engine Stand Bolt Kit
|
Block System: Engine Mounting
|
With this Kit you can easily bolt your Modular Block
to most engine test stands
|
|
MODSHALLESBK107
|
|
|
Exhaust Manifold/Header Bolt Kit
|
Block System: Exhaust Mounting
|
Mounts one
(1) Exhasut Manifold or Header to the Block. Two (2) needed per Engine
|
|
MODSH3VEMBK003
|
|
|
Engine Main Side Bolt Kit (Iron Block)
|
Block System: Main Bearing Mounting
|
Secures the Engine's Main Bearing Caps to the
Sides of the Block. Our Bolts are much stronger then stock parts for peace of mind
New for 2011...OEM Ford Iron Block Side Bolt Kit !!!
New for 2011...ARP 2000 Side Bolts for Iron Block 4.6L Engines !!! Finally
.
|
|
MODSHIRONSBK001
|
|
|
Engine Main SIde Bolt Kit (Aluminum Blocks)
|
Block System: Main Bearing Mounting
|
Secures the Engine's Main Bearing Caps to the Sides of the Block. Our Bolts are much stronger
then stock parts for peace of mind WE DO HAVE 9mm SIDE
BOLTS
New for 2011...OEM Ford 4.6L Aluminum & Aluminator Block Side Bolt
Kit !!!
New for 2011...ARP
2000 Side Bolts for Aluminum Block 5.4L Engines !!! Finally .
|
|
Aluminator, WAP or NVH Aluminum Block
MODSHALUMMSBK001
TEKSID Aluminum Block only
MODSHTEKSID001
|
|
|
Dip-Stick Tube Bolt Kit
|
Lubrication System:
Dip Stick Mounting
|
Secures the Dip-Stick Tube to the Block
|
|
MODSHALLDST009
|
|
|
Timing Chain Guide Bolt
|
Lubrication System: Timing Guide Mounting
|
Secures the Timing Chain Guide to the
block with stroger more durable Socket Head Bolts, a great investment in quality
|
|
MODSHALLTCG009
|
|
|
Timing Chain Tensioner Kit
|
Lubrication System: Timing Chain Mounting
|
Mounts the Timing Chain Tensioner to the Block, don't
settle for OEM quality, when you can use or stronger Socket Head Bolts instead.
|
|
MODSHALLTCT009
|
|
|
Dry Sump Pump Mounting Kit
|
Lubrication System: Dry Sump Mounting
|
Kit supplies needed parts to mount one (1) Dry Sump
Pump Mounting Plate to Engine
|
|
MODSHALLDSPM009
|
|
|
Engine Oil Pan Mounting Kit
|
Lubrication
System: Engine Oil Pan Mounting
|
Supplies all Bolts needed to mount one (1) Engine Oil Pan to Block, both OEM and Aftermarket Pans, with
quality Socket Head Bolt in Black Oxide or Stainless Steel.
|
|
MODSHALLOPMK009
|
|
|
Oil Cooler/Filter Mounting Kit
|
Lubrication
System: Engine Oil Cooler/Filter Mounting
|
Mounts the Engine Oil Cooler/Filter or Aftermarket Oil Re-location Plate to Engine Block, with or great
Socket Head Bolts. Choose form Stainless Steel or Black Oxide finish.
|
|
MODSHALLOCFM009
|
|
|
Oil Pump Mouinting
Kit
|
Lubrication
System: Oil Pump Mounting
|
Mounts the Engine Oil Pump Inside the Block. Also
comes with hardware to mount the Pick-Up Tube to Pump. Why take a chance with your engine? Use our super high
strength Socket Head Bolts the first time and sleep easy.
|
|
MODSHALLOPMK001
|
|
|
Camshaft Bearing Mounting Plate Kit
|
Lubrication System: Camshaft Bearing Mounting
|
Kit Kit mounts the Camshaft Bearing Cap Mounts to the
Head. Longer and Stronger Bolts allow a better/tighter Bearing Cap Union. Don't take chances with you expensive
Cylinder Heads/ Camshafts, use our stronger Socket Head Bolts. Kit contents
mount one head, two (2) kits needed per Engine
|
|
MODSH3VCBMP003
|
|
|
Rear Seal Mounting Plate Kit
|
Lubrication System: Rear Seal Mounting
|
Kit mounts the Rear Main Seal Plate to the back of the
Block, with first rate, High Quality Socket Head Bolts. Don't take chances with OEM, worn and re-used bolts.
|
|
MODSHALLRSMP009
|
|
|
Front Timing Cover Kit
|
Lubrication System: Timing Cover Mounting
|
This Kit mounts the Front Timing Cover to the Block, with Socket Head Bolts in Black Oxide or Stainless
Steel finish. Both offer a great look at a great price with better then OEM performance.
|
|
MODSH3VFTC003
|
|
|
Valve Cover Bolt Kit
|
Please Note: These kits are sold as individual
kits...You will need  Two (2) kits to complete one engine!
|
Valve Cover Bolt Kit, Fits all 3V Heads. Why use the dule, ordinary and used OEM fasteners when
you can add strength and looks in one quick and easy fix? We supply you with Stroger, Better Looking Socket head
Bolts and all you ahve to do is remove the OEM bolts from the head, then push off the valve sealing rubber gasket, slide that
over the new Socket head Bolts and re-insert them into the head and tighen down. That's all there is to a great
custom look!
|
|
MODSH3VVCK003
|
|
|
Water Pump Mounting Kit
|
Cooling System:
Water Pump Mounting
|
Mounts One (1) Water Pump to the Block
|
|
MODSHALLWPMK001
|
|
|
Water Pump Pulley Mounting Kit
|
Cooling
System: Water Pump Mounting
|
Mounts Drive Pulley to Water Pump with Socket Heads
Bolts, in either Black Oxide or Shinny Stainless Steel. In ten minuets you can have a great custom look!
|
|
MODSHALLWPPK001
|
|
|
Water Cross-Over Tube
|
Cooling System: Water Cross-Over Mounting
|
This kit replaces all the OEM fasteners with Stronger, Black
Oxide or Stainless Steel Socket Head Bolts. Water Cross-Over kit als supplies all Thermostae fasteners
|
|
MODSH3VWCT003
|
|
|
Water Heater Tube Kit
|
Cooling
System: Water Heater Tube Mounting
|
This is the long Water heater Tube that runs from the
back of the Water Pump, under the Intake Manifold, and out the back of the engine where it connects to the Heater Hoses.
|
|
MODSHALLWHT004
|
|
|
Water Heater Connector Kit
|
Cooling
System: Water Heater Connection Mounting
|
This is the Odd looking Water Heater Connection that
mounts to the back of the Cylinder Heads and allows the connect for the water heater return. Don't settle for used
hardware when quality Socket Head Bolts are so easy to get.
|
|
MODSHALLWHC004
|
|
| |
|
|
|
|
|
|
Starter Bolt Kit
|
Starting System:
Starter Mounting
|
Kit mounts both 2 or 3 Bolt Starters, with our Strong
better looking Socket Head Bolts....In either Black Oxide or Stainless Steel finish!
|
|
MODSHALLSBK109
|
|
|
Starter Solenoid Bolt Kit
|
Starting System: Starter Solenoid Mounting
|
This kit replaces the Starter Solenoid Bolts with better
Black Oxide or Shinny Stainless Steel Socket Head Bolts, for a custom look many never realize. When looks count and
you need to sweet the small stuff, this kit adds a lot to the starter area.
|
|
MODSHSTRTSB001
|
|
|
Starter Back Cover Bolt Kit
|
Starting System:
Starter Back Cover Mounting
|
This kit replaces the back Cover screws with Black
Oxide or Stainless Steel Socket Head Bolts. You can add strength and custom looks in one quick swap.
|
|
MODSH0304AMB001
|
|
|
Starter Case Bolt Kit
|
Starting System:
Starter Case Mounting
|
Kit We have a great kit that adds alot of strength and function to the starter motor.
Our new Starter Case Bolt Kit, uses Black Oxide Socket Head Bolts to replace the OEM bolts for a great custom look and added
strength.
|
|
MODSHSTRTCB001
|
|
|
Alternator Mounting Kit
|
Charging System: Alternator Mounting
|
This Kit is used to attach the Alternator to its mount.
|
|
MODSH0304AMK001
|
|
|
Alternator Case Bolt Kit
|
Charging System: Alternator Case Mounting
|
This kit replaces the Alternator Side Case Bolts that hold the case together, with new, stronger Black Oxide
or Stainless Steel Socket Head Bolts that look great and add a custom look. Great way to cover the small things many
forget about.
|
|
MODSH6GCS006
|
|
|
Alternator Bushing Holder Screw Kit
|
Charger System: Alternator Brush Mounting
|
This kit replaces the OEM screws that hold the Brush
Cover or Holder in place. We offer both Black Oxide or Shinny Stainless Steel Socket Head Bolts, what a great way to
customize something most forget about!
|
|
MODSH3GBH003
|
|
|
Alternator Voltage Regulator Bolt Kit
|
Charger System: Alternator Voltage Regulator Mounting
|
The Voltage Regulator is located on the back side of the
Alternator. It is held in place with 4-small screws that really go un-noticed. This kit replaces them with Black
Oxide or Stainless Steel Socket Head Bolts, that will get noticed and make that small part pop!
|
|
MODSH3GRB003
|
|
|
Alternator Power Stud Kit
|
Charger System: Alternator Power Cable Mounting
|
This kit replaces the OEM Power Stud or Connection
Nuts with Steel or Stainless Steel Nuts. Great way to add some shine to a old Alternator, plus improve the electrical
connection.
|
|
MODSH6GPS006
|
|
|
Alternator Top Brace Kit
|
Charging System: Alternator Mounting
|
The Alternator is held by both the bottom main mounting bolts
and the Top Brace that keeps it from deflecting. Our kit supplies you with all the bolts needed to
mount the Top Brace. You can choose from Black Oxide or Stainless Steel, for your own custom look.
|
|
MODSH3VATBK003
|
|
|
Manifold Air Direction Motor
|
Fuel / Air Intake System: Manifold Air
Direction Motor Mounting
|
The Air Diverter Motor in located in the center of the engine
directly behind the manifold. We offer a kit to replace the OEM bolts with stronger, nicer looking Socket Head Bolts.
|
|
MODSH3VIBM003
|
|
|
Throttle Body Motor Cover Bolt Kit
|
Fuel / Air Intake System: Throttle Body
Motor Mounting
|
The Throttle Body on a 3-Valve engine is very easy to
service, located on the very front of the engine, on the drivers side of the Throttle Body. This pices is what electronically
operates the throttle body blade and increases or de-creases the throttle setting. Our kit replaces the OEM Factory
bolts with stronger and much Better looking Socket Head Bolts available in Black Oxide or Stainless Steel. You can have
a custom look in less then 5 Minuets, what are you waiting for?
|
|
MODSH3VTBMC003
|
|
|
Throttle Body Back Plate Cover Kit
|
Fuel / Air Intake System: Throttle Body Motor Mounting
|
This is a great new kit we offer! It is specifically for the newer 3-Valve engines and
looks great with either our Black Oxide or Stainless Steel, Socket Head Bolts. The Motor Cover is located on the Throttle
Body's Driver Side, and sticks out about two inches. This is the Motor that operates the internal throttle blade,
and is an easy customization which takes about a minute!
|
|
MODSH3VTBBPC003
|
|
|
Throttle Body Bolt Kit
|
Fuel / Air Intake System: Throttle Body Mounting
|
The Throttle Body on a 3-Valve engine is very easy to service, located
on the very front of the engine. Our kit replaces the OEM Factory bolts with stronger and much Better looking Socket
Head Bolts available in Black Oxide or Stainless Steel. You can have a custom look in less than 5 Minutes, what are
you waiting for? Kit works with Stock Engine Cover, just remove steel incerts from rubber grommets, and use Socket Head
Bolts.
|
|
MODSH3VTBMK003
|
|
|
Intake Manifold Bolt Kit
|
Fuel / Air Intake System: Intake Manifold Mounting
|
The new 3-Valve engine use a very neat composite Intake manifold,
that dominates the engine. Our Kit replaces the factory OEM bolts with much better looking and stronger Socket Head
Bolts in either Black Oxide or Stainless Steel.
A great way to increase strength and looks at the same time!
|
|
MODSH3VIM003
|
|
|
Fuel Tap Bolt Kit
|
Fuel / Air Intake System: Fuel Transducer
Mounting
|
Locate on the Driver Side of the Fuel Rail, is a Fuel
Tap use by the Factory to feed the Rail, but also used by the Aftermarket to Tap into the Fuel System for Nitrous Oxide kits
and other applications. Our kit provides both OEM lenght and extra long lenght Socket Head Bolts to Strength that area
and allow for a custom look. You have the choose of Black Oxide or Stainless Steel!
|
|
MODSH3VFRT003
|
|
| |
|
|
|
|
|
|
Fuel Rail Mounting Kit
|
Fuel / Air Intake System:
Fuel Rail Mounting
|
Kit mounts
the Fuel Rails to the Manifold and works with stock and most aftermarket fuel rail makers. It you wish to keep the stock
plastic engine cover that mounts to the rear two fuel rail bolts, then make sure you purchase that kit, as the bolts are longer
and washer type is different for that kit.
|
|
MODSH3VFRTM003
|
|
|
Electronic Vacuum Regulator
|
Electrical
System: Sensor Mounting
|
Kit mounts this Electronic Vacuum Regulator
to the rear most section of the Intake Manifold
|
|
MODSH3VEVR003
|
|
|
Idle Air Control Valve Mounting Kit
|
Electrical System:
Cam Sensor Mounting
|
Kit Mounts the Idle Air Control Valve
|
|
MODSH3VIAC003
|
|
|
EGR Valve Mounting Kit
|
Electrical System: EGR
Sensor Mounting
|
Mounts EGR Valve to back of Intake body.
Looks as good as it holds.
|
|
MODSH3VEGR003
|
|
|
Throttle Position Switch Kit
|
Electrical System: TPS Mounting
|
Kit mounts the Throttle Position Switch to Throttle
Body. It's a great way to turn a small space into a show stopper.
|
|
MODSH3VTPS003
|
|
|
Fuel Transducer Bolt Kit
|
Electrical System: Fuel
Sensor Mounting
|
Kit Mounts pick-up Cable to Fuel Transducer
|
|
MODSHALL000004
|
|
|
Crankshaft Position Sensor Kit
|
Electrical System: Crankshaft Sensor Mounting
|
Mounts Crankshaft Positiion Sensor to Front Timing Cover
with super strong and great looking Socket Head Bolts!
|
|
MODSH3VCKSB003
|
|
|
Camshaft Position Sensor Kit
|
Electrical System:
Cam Sensor Mounting
|
Kit mounts the Camshaft Position Sensor to the upper
Timing Cover
|
|
MODSH3VCMSB003
|
|
|
Cylinder Head Temperature Sensor Kit
|
Electrical System: Cylinder
Head Sensor Mounting
|
Kit mounts the Cylinder Head Temperature Sensors on
the back of each head. One kit for each sensor
|
|
MODSHALLCHT001
|
|
|
Idle Pulley Bolt Kit
|
Accessory Dress: Idler Pulley Mounting
|
Kit mounts one (1) Idler pulley. Looks great and
strong too.
|
|
MODSHALLIPBK001
|
|
|
Belt Tensioner Mounting Kit
|
Accessory Dress: Belt Tensioner Mounting
|
Kit mounts the Belt Tensioner to the Front Timing Cover.
Bolt kit looks great! try the Stainless Steel
|
|
MODSH3VBTMK003
|
|
|
Power Steering Pump Mounting Kit
|
Accessory Dress: Power Steering Pump Mounting
|
Kit mounts one Power Steering Pump to side of engine.
|
|
MODSH3VPSP003
|
|
|
AC Compressor Front Pulley Locking Bolt
|
Accessory Dress: AC Compressor
Pulley Mounting
|
The front pulley on the AC Compressor is friction fitted, and has a single bolt in it's center
to hold the pulley in place. This kit replaces the OEM bolt with a Socket Head Bolt in either Black Oxide or Stainless
Steel, for a unique and Custom finish.
|
|
MODSHACCPB001
|
|
|
AC Compressor Case Side Bolt Kit
|
Accessory Dress: AC Compressor Case Mouunting
|
A truely remarkable kit, and one not found anywheer else. This kit allows you to replace
the OEM bolts that hold the AC Compressor halfs together, with new Socket Head Bolts, in either Black Oxide or Stainless Steel
finish, for a fantastic custom look
|
|
MODSHACCB001
|
|
|
AC Compressor Mounting Kit
|
Accessory Dress: AC Compressor Mounting
|
Kit mounts one AC Compressor to your engine with great
looking and super strong Socket Head Bolts that come in either Black Oxide or shiny Stainless Steel Finish. Why settle
for OEM when you have an option!
|
|
MODSH3VAMK003
|
|
|
AC Compressor High Pressure Discharge / Suction Line Mounting Bolt
|
Accessory Dress: AC Compressor Suction/Discharge
Fitting Mounting
|
The AC Compressor Intake/Discharge Pipe is located on the top side back behind the pulley. It has two
hoses attched to it, and the Pipe itself is held in-place by a single bolts, that seperates the twin tubes of the Pipe.
Changing over to a Black Oxide or Stainless Steel Socket Head Bolt is easy and quick, plus adds that extra touch, most fail
to realize
|
|
MODSHACIB001
|
|
|
Motor Mount (Energy Suspension Type) Bolt Kit
|
Block System: Engine Mounting
|
This is another kit that goes with the Motor Mount Kit. In this one we supply
a Steel Jet Nut or Stainless Steel Nut for the stud that physically mounts to the car. This kit can be used with or
without a Energy Suspension type mount, it allows anyone to up-grade and replace there old, rusty or out-dated Nut.
|
|
MODSH3VTBIM003
|
|
|
Motor Mount Center Stud Nut Kit
|
Block System: Engine Mounting
|
This kit is in response to our many customers.....It replaces the four sets of bolts that hold the Energy
Suspension Type Motor Mounts together. These motor mounts basically sandwich two pieces of steel between a polyurathane
molding, which holds the mounts firmly in-place yet absorbs most vibrations and movement these type of mounts are famous for.
We use very strong, 12.9DIN Black Oxide bolts to make sure this connection stays together, no matter the abbuse you put it
to. Kits also available in Stainless Steel for that custom, shinny look.
|
|
MODSHMMES001
|
|
|
Valve
Cover Kits
Threaded Stud
|
|
Valve Cover Kit
We use only the best Threaded Studs we can fine, then combined that with the same Super Hard and Durable Washers we use in
our Socket Head Kits, and throw in the right amount of Flanged Nuts. This combo makes for a very strong and formidable
fastener kit. Studs should always be used when available and when the conditions allow. This kit allows the installation of one Valve Cover.
|
|
|
Front Engine
(Timing) Cover
Threaded Stud
|
|
Front Engine (Timing)
Cover
There isn't a better Threaded Stud Kit on the market, and Pro
Weld has them. This kit mounts the Front Engine (Timing) Cover to the engine. Threaded
Studs save wear and tear on threaded holes, especially when used in aluminum engine blocks. We used only
the finest pieces in our kits, and this one is no different. Kit does one
complete front engine cover
|
|
|
Water Pump Kit
Threaded Stud
|
|
Water Pump Kit
This kit mounts the Water Pump Securely to the front of the engine block.
We only use the best Threaded Studs, Washers and Flanged Nuts Available.
Kit mounts one Water Pump
|
|
|
Water Pump Pulley, Drive Hub,
Stud Mounting Kit
Stud Kit
|
|
Water Pump
Pulley, Drive Hub, Stud Mounting Kit
We use this kit to mount the
Drive Hub/Pulley to the Water Pump. You can combine this kit with the Water Pump Mounting Kit, to make a bullet proof
Water Pump Assembly.
|
|
|
Oil Pan Stud Kit
Threaded
Stud
|
|
Oil Pan Stud Kit
Our Oil Pan Threaded Stud Kit is just the ticket
for Racer. The Threaded Stud Kit allows multiple Oil Pan removals to inspect the lower end, without fear of wear on
the threaded holes in the engine. But, you also don't have to be a racer to figure out the benefit of using this
stud kit, and as always, we used only the beast pieces for this kit.
Kit mounts one stock or aftermarket oil pan
|
|
|
Bell Housing Stud Kit
Threaded Stud
|
|
Bell
Housing Stud Kit
Wow, Tires of lying on your back trying to alien
the Engine to the Transmission? So is everyone else. Besides helping to protect the threads from wear and the
very real chance of cross-threading, our Bell Housing Threaded Stud kit is a life saver, and possibly a engine block saver
as well.
Kit contains everything for one engine
|
|
|
Rear Main Seal Plate Kit
Threaded Stud
|
|
Rear Main Seal Plate
Don't take a chance with your engine, use our Threaded Stud kit on all your
engines available threaded holes, and protect against striped threads, worn threads or cross-threads. This kit mounts
the Rear main Seal Plate to the rear most section of the Engine Block.
Kit mounts one Rear Seal Plate
|
|
|
Exhaust Manifold/Header Stud Kit
Threaded Stud
|
|
Exhaust Manifold/Header Stud Kit
Our Threaded Stud kits can dramatically increase
the speed and ease of installing Headers and Exhaust manifolds, when available. Because of the harsh nature of the exhaust
manifold, the threaded holes that hold these Headers on can get severely damaged or striped by repeated use. Use our
Studs and save your Heads.
One Kit mounts one Header or Exhaust manifold
|
|
|
Engine Oil Cooler/Filter,
Stud Kit
Threaded Stud Kit
|
|
Engine Oil Cooler/Filter Mount
Our oil Cooler/Filter assembly Mounting Kit uses the very best Threaded Studs
we can fine. This Stud Kit also works with all aftermarket Remote Filter mounts from Moroso, Canton and even our own
Dry Sump plate from Aviaid. When only the best will do, Call Pro Weld.
Mounts One Cooler/Filter Assembly
|
|
| |
|
|
|
