|
Socket Head Kit
|
Department
|
Full Description
|
|
Part Number
|
Purchase
|
|
Motor Mounts Bolt Kit
|
Block Related System:
Motor Mounting
|
This Kit supplies the Socket Head Bolts to Attach the Motor
Mounts to the Engine.
|
|
MODSHALLMMK107
|
|
|
Bell Housing Bolt Kit
|
Block Related System: Bellhousing Mounting
|
Kit allows the transmission to be mated to the engine
|
|
MODSHALLBHK106
|
|
|
Engine Stand Bolt Kit
|
Block Related System: Motor Mounting
|
With this Kit you can easily bolt your Modular Block to most
engine test stands
|
|
MODSHALLESBK107
|
|
|
Exhaust Manifold/Header Bolt Kit
|
Block Related System: Exhaust Mounting
|
Mounts one (1) Exhasut Manifold or Header to the Block.
Two (2) needed per Engine
|
|
MODSHALLEMBK001
|
|
|
Engine Main SIde Bolt Kit (Aluminum Blocks)
|
Block Related System: Main Bearing Mounting
|
Secures the Engine's Main Bearing Caps to the Sides of the Block. Our Bolts are much stronger
then stock parts for peace of mind
New for 2011...OEM Ford
4.6L Aluminum & Aluminator Block Side Bolt Kit !!!
New
for 2011...ARP 2000 Side Bolts for Aluminum Block 5.4L Engines !!! Finally .
|
|
Aluminator, WAP or NVH Aluminum Block
MODSHALUMMSBK001
TEKSID Aluminum Block only
MODSHTEKSID001
|
|
|
Engine Main Side Bolt Kit (Iron Block)
|
Block Related System: Main Bearing Mounting
|
Secures the Engine's Main Bearing Caps to the
Sides of the Block. Our Bolts are much stronger then stock parts for peace of mind
New for 2011...OEM Ford Iron
Block Side Bolt Kit !!!
New for 2011...ARP 2000 Side Bolts for Iron Block 4.6L Engines !!! Finally .
|
|
MODSHIRONSBK001
|
|
|
Dip-Stick Tube Bolt Kit
|
Lubrication System:
Dip Stick Tube Mounting
|
Secures the Dip-Stick Tube to the Block
|
|
MODSHALLDST009
|
|
|
Timing Chain Guide Bolt
|
Lubrication System: Timing Chain Bolt Mounting
|
Secures the Timing chain Guide to the block
|
|
MODSHALLTCG009
|
|
|
Timing Chain Tensioner Kit
|
Lubrication System: Timing Chain Tensioner Mounting
|
Mounts the Timing Chain Tensioner to the Block
|
|
MODSHALLTCT009
|
|
|
Engine Oil Pan Mounting Kit
|
Lubrication System: Engine Oil Pan Mounting
|
Supplies all Bolts needed to mount one (1) Engine Oil Pan
to Block, both OEM and Aftermarket Pans
|
|
MODSHALLOPMK009
|
|
|
Dry Sump Pump Mounting Kit
|
Lubrication System: Dry Sump Pump Mounting
|
Kit supplies needed parts to mount one (1) Dry Sump Pump
Mounting Plate to Engine
|
|
MODSHALLDSPM009
|
|
|
Oil Cooler/Filter Mounting Kit
|
Lubrication System: Oil Cooler/Fillter Plate Mounting
|
Mounts the Engine Oil Cooler/Filter or Aftermarket oil Re-location
Plate to Engine Block
|
|
MODSHALLOCFM009
|
|
|
Oil Pump Mouinting
Kit
|
Lubrication System: Engine Oil Pump Mounting
|
Mounts the Engine Oil Pump Inside the Block. Also comes
with hardware to mount the Pick-Up Tube to Pump
|
|
MODSHALLOPMK001
|
|
|
Camshaft Bearing Mounting Plate Kit
|
Lubrication System: Cam Bearing Mounting
|
Kit mounts the Camshaft Bearing Cap Mounts to the Head.
Longer and Stronger Bolts allow a better/tighter Bearing Cap Union. Kit
contents mount one head, two (2) kits needed per Engine
|
|
MODSH4VCBMP004
|
|
|
Rear Seal Mounting Plate Kit
|
Lubrication System: Rear
Seal Plate Mounting
|
Kit mounts the Rear Main Seal Plate to the back of the Block
|
|
MODSHALLRSMP009
|
|
|
Front Timing Cover Kit
|
Lubrication System: Front Timing Cover Mounting
|
This Kit mounts the Front Timing Cover to the Block
|
|
MODSH0304FTC001
|
|
|
Valve Cover Bolt Kit
|
Lubrication System:
Valve Cover Mounting
Please Note: These kits are sold as individual
kits...You will need  Two (2) kits to complete one engine!
|
Valve Cover Bolt Kit, Fits all 4V Heads
|
|
MODSH0304VCK004
|
|
|
Coil Cover Bolt Kit
|
Lubrication System: Coil
Cover Plate Mounting
Please Note:
These kits are sold as individual kits...You will need Two (2) kits to complete one engine!
|
Coil Cover bolt kit, works on all 4V Heads, Looks great
|
|
MODSH0304CCK004
|
|
|
Water Pump Mounting Kit
|
Cooling System:
Water Pump Mounting
|
Mounts One (1) Water Pump to the Block
|
|
MODSHALLWPMK001
|
|
|
Water Pump Pulley Mounting Kit
|
Cooling System: Water Pump
Pulley Mounting
|
Mounts Drive Pulley to Water Pump
|
|
MODSHALLWPPK001
|
|
|
Water Heater Tube Kit
|
Cooling System: Water Heater
Tube Mounting
|
|
|
MODSHALLWHT004
|
|
|
Water Heater Connector Kit
|
Cooling System: Water Heat
Connector Mounting
|
|
|
MODSHALLWHC004
|
|
|
Thermostat Housing Bolt Kit
|
Cooling System: Thermostate Housing Mounting
|
Kit replaces the bolts that hold the thermostat together
|
|
MODSH0304THK004
|
|
|
Water Coolant Cross-Over Tube
|
Cooling System: Water Cross-Over
Tube Mounting
|
Secures the Water Coolant Cross-Over Tube to the Heads
|
|
MODSH9904WCT004
|
|
|
Upper Intake Manifold Kit
|
Fuel & Air Intake System: Upper Intake Mounting
|
|
|
MODSH9904UIML004
|
|
| |
|
|
|
MODSHALLSBK109
|
|
|
Upper Intake Manifold to Throttle Body
|
Fuel & Air Intake System: Upper
Intake Mounting
|
Kit mounts the Throttle Body to Intake Manifold
|
|
MODSH9904TBIM004
|
|
|
Lower Intake Manifold Kit
|
Fuel & Air Intake System: Lower Intake Mounting
|
|
|
MODSH9904LIMH004
|
|
|
Throttle Cable Bracket Kit
|
Fuel & Air Intake System: Throttle
Cable Mounting
|
Kit mounts Throttle Cable Bracket to the Intake manifold.
|
|
MODSH9904TCBM044
|
|
|
Fuel Rail Mounting Kit
|
Fuel & Air Intake System: Fuel
Rail Mounting
|
Kit mounts the Fuel Rails to the Manifold
|
|
MODSH9904FRTM004
|
|
|
EGR Valve Mounting Kit
|
Fuel & Air Intake System: EGR Sensor Mounting
|
Mounts EGR Valve to back od Blower body. Looks as good
as it holds.
|
|
MODSH4VEGR001
|
|
|
Electronic Vacuum Regulator Kit
|
Electrical System: Vacuum Regulator Sensor
Mounting
|
Kit mounts the Electronic Vacuum Regulator to the top of the Intake Manifold
|
|
MODSH9904EVR049
|
|
|
Idle Air Control Valve Mounting Kit
|
Electrical System: IAC Valve Mounting
|
Kit Mounts the Idle Air Control Valve
|
|
MODSH9904IDA044
|
|
|
Throttle Position Switch Kit
|
Electrical System:Throttle Position
Switch Mounting
|
Kit mounts the Throttle Position Switch to Throttle Body
|
|
MODSHALL000001
|
|
|
Fuel Transducer Bolt Kit
|
Electrical System: Fuel Transducer Sensor
Mounting
|
Kit Mounts pick-up Cable to Fuel Transducer
|
|
MODSHALL000004
|
|
|
Crankshaft Position Sensor Kit
|
Electrical System: Crankshaft Sensor Mounting
|
Mounts Crackshaft Positiion Sensor to Front Timing Cover
|
|
MODSHALLCRPS002
|
|
|
Camshaft Position Sensor Kit
|
Electrical System:Camshaft Sensor Mounting
|
Kit mounts the Camshaft Position Sensor to the upper Timing
Cover
|
|
MODSHALLCMPS001
|
|
|
Cylinder Head Temperature Kit
|
Electrical System: Cylinder Head Sensor
Mounting
|
Kit mounts the Cylinder Head Temperature Sensors on the back
of each head. One kit for each sensor
|
|
MODSHALLCHT001
|
|
|
Belt Tensioner Mounting Kit
|
Accessory Drive System: Belt Tensioner Mounting
|
Kit mounts the Belt Tensioner to the Front Timing Cover.
Bolt kit looks great! try the Stainless Steel
|
|
MODSHALLBTMB001
|
|
|
Idle Pulley Bolt Kit
|
Accessory Drive System: Idler Pulley Mounting
|
Kit mounts one (1) Idler pulley. Looks great and strong
too.
|
|
MODSHALLIPBK001
|
|
|
Power Steering Pump Mounting Kit
|
Accessory Drive System: Power Steering Pump Mounting
|
Kit mounts one Power Steering Pump to side of engine.
|
|
MODSHALLPSBK001
|
|
|
AC Compressor Mounting Kit
|
Accessory Drive System: AC Compressor Mounting
|
Kit mounts one AC Compressor to your engine
|
|
MODSHALLACM001
|
|
|
AC
Compressor Case Side Bolts
|
Accessory Drive System: AC Compressor Case Mounting
|
A truely remarkable kit, and one not found anywheer else. This kit allows you to replace
the OEM bolts that hold the AC Compressor halfs together, with new Socket Head Bolts, in either Black Oxide or Stainless Steel
finish, for a fantastic custom look.
|
|
MODSHACSB001
|
|
|
AC
Compressor Pulley Bolt
|
Accessory Drive System: AC Compressor Pulley Mounting
|
The front pulley on the AC Compressor is friction fitted, and has a single bolt in it's center
to hold the pulley in place. This kit replaces the OEM bolt with a Socket Head Bolt in either Black Oxide or Stainless
Steel, for a unique and Custom finish.
|
|
MODSHACPB001
|
|
|
AC
Compressor Inlet/Discharge Bolt
|
Accessory Drive System: AC Compressor Inlet/Discharge
Pipe Mounting
|
The AC Compressor Intake/Discharge Pipe is located on
the top side back behind the pulley. It has two hoses attched to it, and the Pipe itself is held in-place by a single
bolts, that seperates the twin tubes of the Pipe. Changing over to a Black Oxide or Stainless Steel Socket Head Bolt
is easy and quick, plus adds that extra touch, most fail to realize.
|
|
MODSHACIB001
|
|
|
Top Alternator Brace Kit
|
Alternator System: Alternator Top Brace Mounting
|
|
|
MODSH9904TAB004
|
|
|
Alternator Mounting Kit
|
Alternator System: Alternator Mounting
|
This Kit is used to attach the Alternator to its mount.
|
|
MODSH0304AMK001
|
|
|
Alternator Case Half Bolt Kit
|
Alternator System: Alternator Case Mounting
|
For those that like the smallest of details, This kit allows
you to replace the Alternator Case Bolts, with new, stronger and better looking Black oxide or Stainless Steel Socket Head
Bolts. Just the ticket for the ultimate in finish detail!
|
|
MODSH3GCB003
MODSH4GCB004
MODSH6GCB006
|
|
|
Alternator Brush Cover Bolt Kit
|
Alternator System: Alternator Brush Cover Mounting
|
Keeping the details important, this kit replaces the Brush
Cover located on the back of some Alternators. For more information about your Alternator, see the Alternator Info Section.
|
|
MODSH3GBH003
|
|
|
Alternator Regulator Bolt Kit
|
Alternator System: Alternator Brushing Holder Mounting
|
The Voltage Regulator is located on the back on the Alternator.
This kit allows you to replace the factory hardware with new Black Oxide or shinny Stainless Steel hardware, for the most
detail oriented custom look.
|
|
MODSH3GRB003
|
|
|
Alternator Power Cable Nut Kit
|
Alternator System: Alternator Power Cable Mounting
|
The Power Cable Nut is the item the
holds the Main Power Cable (large Cable) to the rear of the alternator. It is the cable that re-charges the battery
and runs the show. Replacing the old nut with a new Stainless Steel Nut will not only look sharp but will ward-off corrosion
and maintain a good electrical connection.
|
|
MODSHALLPS009
|
|
| |
|
|
|
|
|
|
Starter Bolt Kit
|
Starting System:
Starter Mounting
|
Kit mounts both 2 or 3 Bolt Starters
|
|
MODSHALLSBK109
|
|
|
Starter Case Bolt Kit
|
Starting System:
Starter Case Mounting
|
This kit replaces the two long starter case bolts that basically
hold the Starter together. These are not available from Ford and while improving strength, they also make a great looking
aditiion.
|
|
MODSHSTRTCB001
|
|
|
Starter
Solenoid Bolt Kit
|
Starting System:
Starter Silenoid Mounting
|
These Bolts hold the Starter Solenoid
onto the Starter Body. Available in Black Oxide or Stainless Steel, they combine both high strength and great looks....Details
count!
|
|
MODSHSTRTSB001
|
|
|
Starter Back Cover Bolt Kit
|
Starting System:
Starter Back Cover Mounting
|
The starter back cover is located
on the back of the long end of the starter, and covers the inside of the starter. Available in both Black Oxide and
Stainless Steel, this kit turns a boring stock starter into a show stopper.
|
|
MODSHSTRTBC001
|
|
|
Motor Mount (Energy Suspension Type) Bolt Kit
|
Block Related System: Engine Mounting
|
This kit is in response to our many customers.....It replaces
the four sets of bolts that hold the Energy Suspension Type Motor Mounts together. These motor mounts basically sandwich
two pieces of steel between a polyurathane molding, which holds the mounts firmly in-place yet absorbs most vibrations and
movement these type of mounts are famous for. We use very strong, 12.9DIN Black Oxide bolts to make sure this connection
stays together, no matter the abbuse you put it to. Kits also available in Stainless Steel for that custom, shinny look.
|
|
MODSHMMES001
|
|
|
Motor Mount, Mounting Nut Kit
|
Block Related System: Engine
Mounting
|
This is another kit that goes with the Motor Mount Kit. In this one we supply a Steel Jet
Nut or Stainless Steel Nut for the stud that physically mounts to the car. This kit can be used with or without a Energy
Suspension type mount, it allows anyone to up-grade and replace there old, rusty or out-dated Nut.
|
|
MODNUTMMALL001
|
|
|
Valve
Cover Kits
Threaded Stud
|
|
Valve Cover Kit
We use only the best Threaded Studs we can fine, then combined that with the same Super Hard and Durable Washers we use in
our Socket Head Kits, and throw in the right amount of Flanged Nuts. This combo makes for a very strong and formidable
fastener kit. Studs should always be used when available and when the conditions allow. This kit allows the installation of one Valve Cover.
|
|
|
Front Engine
(Timing) Cover
Threaded Stud
|
|
Front Engine (Timing)
Cover
There isn't a better Threaded Stud Kit on the market, and Pro
Weld has them. This kit mounts the Front Engine (Timing) Cover to the engine. Threaded
Studs save wear and tear on threaded holes, especially when used in aluminum engine blocks. We used only
the finest pieces in our kits, and this one is no different. Kit does one
complete front engine cover
|
|
|
Water Pump Kit
Threaded Stud
|
|
Water Pump Kit
This kit mounts the Water Pump Securely to the front of the engine block.
We only use the best Threaded Studs, Washers and Flanged Nuts Available.
Kit mounts one Water Pump
|
|
|
Water Pump Pulley, Drive Hub,
Stud Mounting Kit
Stud Kit
|
|
Water Pump
Pulley, Drive Hub, Stud Mounting Kit
We use this kit to mount the
Drive Hub/Pulley to the Water Pump. You can combine this kit with the Water Pump Mounting Kit, to make a bullet proof
Water Pump Assembly.
|
|
|
Oil Pan Stud Kit
Threaded
Stud
|
|
Oil Pan Stud Kit
Our Oil Pan Threaded Stud Kit is just the ticket
for Racer. The Threaded Stud Kit allows multiple Oil Pan removals to inspect the lower end, without fear of wear on
the threaded holes in the engine. But, you also don't have to be a racer to figure out the benefit of using this
stud kit, and as always, we used only the beast pieces for this kit.
Kit mounts one stock or aftermarket oil pan
|
|
|
Bell Housing Stud Kit
Threaded Stud
|
|
Bell
Housing Stud Kit
Wow, Tires of lying on your back trying to alien
the Engine to the Transmission? So is everyone else. Besides helping to protect the threads from wear and the
very real chance of cross-threading, our Bell Housing Threaded Stud kit is a life saver, and possibly a engine block saver
as well.
Kit contains everything for one engine
|
|
|
Rear Main Seal Plate Kit
Threaded Stud
|
|
Rear Main Seal Plate
Don't take a chance with your engine, use our Threaded Stud kit on all your
engines available threaded holes, and protect against striped threads, worn threads or cross-threads. This kit mounts
the Rear main Seal Plate to the rear most section of the Engine Block.
Kit mounts one Rear Seal Plate
|
|
|
Exhaust Manifold/Header Stud Kit
Threaded Stud
|
|
Exhaust Manifold/Header Stud Kit
Our Threaded Stud kits can dramatically increase
the speed and ease of installing Headers and Exhaust manifolds, when available. Because of the harsh nature of the exhaust
manifold, the threaded holes that hold these Headers on can get severely damaged or striped by repeated use. Use our
Studs and save your Heads.
One Kit mounts one Header or Exhaust manifold
|
|
|
Engine Oil Cooler/Filter,
Stud Kit
Threaded Stud Kit
|
|
Engine Oil Cooler/Filter Mount
Our oil Cooler/Filter assembly Mounting Kit uses the very best Threaded Studs
we can fine. This Stud Kit also works with all aftermarket Remote Filter mounts from Moroso, Canton and even our own
Dry Sump plate from Aviaid. When only the best will do, Call Pro Weld.
Mounts One Cooler/Filter Assembly
|
|
| |
|
|
|
